DTX-PRO V2.00 Firmware Updater
Notice
- Please save your important data onto a USB flash drive before updating the firmware of the DTX-PRO.
- This updater is to be used at the user’s own risk.
- DO NOT power off or disconnect the cable from the DTX-PRO during the updating process. Doing so may damage the DTX-PRO.
- DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO and the USB flash drive may become inoperable.
- If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so does not solve the problem, please contact your Yamaha dealer.
- This firmware and documentation are the exclusive copyrights of Yamaha Corporation.
- Reproducing or modifying all or parts of this firmware or its documentation without permission is strictly prohibited.
- The company names and product names in this document are the trademarks or registered trademarks of their respective companies.
Required Items
- USB flash drive formatted on the DTX-PRO
Please check the URL below for a list of supported USB flash drives.
https://download.yamaha.com
After selecting your country and clicking on “Documents and Data” from the “Support” page, enter the model name into the search box.
Main Enhancements
V1.05 to V2.00
- The amount of Preset Kits has been increased from 40 to 70.
- Several new samples have been added, including Yamaha Recording Custom.
- The amount of preset EQ variations has been increased for cymbal instruments, making it easier to create sounds.
- The update features a new "Bleed Sound" and several Kits that allow you to control the volume of sympathetic resonance with the [EFFECT] knob, and achieve a playing feel closer to that of an acoustic drum.
- It is now possible to determine whether or not the volume of the Trigger Input Source can be adjusted via the [EFFECT] knob for each layer (Menu/Kit Edit/KitModifier/Other/EffectKnobVol).
- Mono or poly can now be selected for each Voice (MENU/Kit Edit/Voice/Layer/Mono/Poly).
- It is now possible to select Voices which cannot be played simultaneously (MENU/KitEdit/Voice/Layer/AltGroup).
- Enhanced the ease of use in making various settings using Voice layers (MENU/KitEdit/Voice/LayerType, LayerMix).
- The Voice menu structure (MENU/Kit Edit/Voice) has been changed according to the new functions.
- The Velocity curve for hitting a Pad (MENU/Trigger/Curve/Velocity Curve) can now be set in greater detail.
- Enhanced the ease of use in making settings for preventing crosstalk between Pads(MENU/Trigger/Crosstalk/Auto Setup).
- The Crosstalk menu structure (MENU/Trigger/Crosstalk) has been changed according to the new functions.
- The sound has been enhanced for greater consistency and naturalness when the same Pad is hit repeatedly (MENU/Utility/General/Humanize).
- A new setting allows raising the pitch of a sound by pressing the hi-hat pedal deeply(Menu/Utility/Pad/HH Pitch Up).
- Added new parameters for greater ease in playing the Kits of this product when sending MIDI messages from an external MIDI device/controller.
- MIDI messages can now be received via the [USB TO DEVICE] terminal from an external MIDI device/controller, with the USB Trigger Link function.
- The audition sound strength of the Trigger Input can now be changed (AUDITIONVELOCITY).
- It is now possible to disable recording of the playback sound of the Recorder(RECORDER/SETTING/RecordingSource).
- The output destination for the playback sound of the Recorder can now be set(RECORDER/SETTING/PlayMode/stereo/[PHONES], [OUTPUT], [USB TO HOST]).
- Fixed other minor problems.
V1.04 to V1.05
- Fixed the problem that the first edge shot on Crash Cymbal makes a bow sound after powering on.
- Fixed the problem that the MinLevel parameter of Trigger setting doesn’t work properly when playing on a Multi-Piezo Pad.
- Fixed minor problems.
V1.03 to V1.04
- Fixed a problem in which rim part on Tom 2 would not sound in Preset Kit9 “D-Funk”,when used in DTX8 series.
V1.02 to V1.03
- Fixed a problem in which the MENU/Utility/Pad/FootClosePos setting was reset to the initial value at power-on.
- Fixed minor problems.
V1.01 to V1.02
- Added the DTX8 series drum kits to the Trigger Setup Wizard.
- Changed setting ranges for some parameters.
- Updated the displays on some screens.
- Fixed minor problems.
V1.00 to V1.01
- Added the DTX502 series drum kits to the Trigger Setup Wizard.
- Fine-adjusted the MENU/Trigger/Crosstalk settings. Since the settings are slightly different from those of version 1.00, readjust the crosstalk settings if necessary.
- Added -6dB, -12dB, and 18dB to the MENU/Utility/Output Gain settings.
- Added PA-HP to the MENU/Utility/Input Output/AUX In/Input Mode settings.
- Added AUX In Gain to the MENU/Utility/Input Output settings.
- Changed setting ranges for some parameters.
- Updated the displays on some screens.
- Fixed minor problems.
Licensaftale og download fil
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Shizuoka, 430-8650, Japan
9. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
10. AMENDMENT
Yamaha may amend, revise or update this Agreement at its discretion. Any change or update that Yamaha makes to this Agreement will be effective after you agree with the updated terms of this Agreement or use this SOFTWARE.
Last updated :January 28, 2020