ATTITUDE LIMITED 3
Pickups and Electronics
Billy’s signature sound comes from a custom woofer pickup developed by YGD (Yamaha Guitar Development). Combining its heavy, powerful low-end and solid fundamental with a DiMarzio designed pickup at the bridge position delivers an incredible tonal range and a strong presence within the band. While stereo output jacks provide separate outputs for the front and rear pickups, mono output is also available. A high cut switch in the front pickup tone control boosts bass output from the front pickup.
Miter Bolting Neck Joint
Miter bolting holds the neck closer and tighter to the body fusing these two separate components into one. Compared to a conventional bolt-on joint, miter bolting efficiently transfers string vibration throughout the body with little loss. This delivers greater body resonance making each note come alive.
Tapsamling
This body structure makes Attitude LTDIII far more resonant than conventional 2 or 3-piece body instruments. Vibrations are transferred easily through the body for an immense, vibrant and loud tone that is unmistakably Attitude.
ATTITUDE LTDIII Neck
A big, thick neck features jumbo frets from frets 1-16 to produce outstanding sustain. The neck is held to the bass body with 4 screws to create a solid bond and tone. The neck also features scallops from frets 17 through 21 and a slap cut ground into the neck that provides greater string access.
ATTITUDE LTDIII Bridge
The solid brass bridge captures and transmits string vibration directly to the body, creating great low-end tone and attack.
Hipshot "D" Tuner
The Hipshot tuner drops the "E" string down a whole step to "D" with the flick is a lever. A gear adjustment provides precision tuning.
Kontroller
1. Front Volume
2. Front Tone (Front P.U. Hi-Cut Switch)
3. Rear Volume (Stereo/Mono Switch)
A.R.E / Acoustic Resonance Enhancement
A.R.E. (Acoustic Resonance Enhancement) er en original træbehandlingsteknologi udviklet af Yamaha. Gennem nøje kontrolleret temperatur, fugtighed og atmosfærisk tryk ændres træets molekylære struktur til en mere akustisk optimal tilstand, magen til den man finder i træet i instrumenter, der er blevet spillet gennem mange år.
I.R.A. / Initial Response Acceleration
Hvis du nogensinde har spillet på en anden guitarists guitar og ikke været i stand til at få det til at lyde rigtigt, kan det være fordi, din måde at spille på er anderledes end hvad guitaren er ""vant til"". En guitar ændres nemlig ved at blive spillet på gennem mange år, og det kan tage tid for en guitar, at tilpasse sig din måde at spille på. Spændinger mellem de forskellige dele såsom finish og træ, krop og hals og gribebræt, saddel, stol osv. skal udløses før alle delene kan resonere frit sammen som et helt instrument. Det tager lang tids brug. Ved at anvende IRA-teknologien, udløses disse spændinger ved at udsætte den færdigsamlede guitar for nogle helt bestemt vibrationer. Når dette er udført responderer guitaren mere præcist på guitaristens spil og har lettere ved at give lyd. Det gør også at guitaren hurtigere ""vænner sig"" til din spillestil. Og så giver det en fremragende sustain (RSP20CR).
